Fencing Hardware

A high strength corner and end post insulator for hot rope, braid, wire, poly-coat and hot-coat...

Crimps meant to make wire repairs or to tie off the ending joint of a fence. Connects wires at a...

Crimps meant to make wire repairs or to tie off the ending joint of a fence. Connects wires at a...

These handy spring clips are for fastening electric fence wire to grooved insulators.

Used to apply tension at the corners of your fencing.

3mm Double post rope splicer for splicing rolls of Polywire.

6mm Double post rope splicer for splicing rolls of 1/4 inch electric rope.

Our double coated High Voltage Connection Wire is very flexible and shields up to 20,000 volts.

A high strength plastic ratchet tensioner for use on polywire and polytape up to 1" wide.

A 3 1/2 inch extension that fits on most t-posts and all wood or vinyl post.

The R-9 contact clamp is an electrical connector used to attach the fence charger directly to the...

Used in corners, tape gates and inline elevation changes greater than 10 degrees.

Fits all 1 1/2" webbing. The stainless steel triangular tensioner holds the webbing tight

For use with Safe-Fence End Tensioners. Accepts gate handle hook for polytape, hot rope, or...

The R-24 is a stainless steel splice buckle for joining rolls of 1 1/2" webbing or splicing tears...

Used to attach the fence charger to the fence strand and burial wire under gates.

For joining rolls of 1/2" webbing or making repairs.

Use to connect the fence controller to the polytape.

Measures wire tension on the fence line. One inch equals 150 pounds of tension.

Use to splice together 1 Inch polytape.